gp30-005g thru gp30-10g page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 3a general purpose plastic rectifier gp30-005g thru gp30-10g features z low cost z ul 94v0 flame retardant epoxy molding compound z diffused junction z high surge current capability z bevel round chip, avalanche operation z glass passivated chip junction mechanical data z case: transfer molded, do201ad, dimensions in inches and (millimeters) z leads: solderable per mil-std-202, method 208 z polarity: cathode indicated by color band z weight: 1.2 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% ratings symbol gp30 -005g gp30 -01g gp30 -02g gp30 -04g gp30 -06g gp30 -08g gp30 -10g units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current 0.375?(9.5mm) lead length at ta=55 c i o 3.0 a peak forward surge current, 8.3ms single half sine-wave superimposed on rated load i fsm 200 a typical junction capacitance (note 1) c j 30 pf typical thermal resistance (note 2) r ja 20 /w operating temperature range t op -55 to + 175 electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol gp30 -005g gp30 -01g gp30 -02g gp30 -04g gp30 -06g gp30 -08g gp30 -10g units maximum forward voltage at i o dc v f 1.1 v maximum reverse current at 25 i r 5 a maximum reverse current at 100 i r 50 a note: 1. measured at 1mhz and applied reverse voltage of 4.0 volts 2. both leads attached to heat si nk 63.563.51t(mm) copper plate at lead length 5mm .375(9.5) .335(8.5) 1.0(25.4) min .220(5.6) .197(5.0) 1.0(25.4) min .052(1.3) .048(1.2)
gp30-005g thru gp30-10g page: 2 ratings and characteristic curve gp30-005g thru gp30-10g t a -ambient temperature ( o c) fig. 1-maximum current rating effect of copper area. resistive/inductive load. 0 20 40 60 80 100 120 140 160 180 200 5c m with 63.5mm x 1.0 cu no heat sink io-average rectified current ( a ) 3.0 2.0 1.0 with 20mm 1.0 cu l 0 20 40 60 80 100 120 140 160 180 200 t a -ambient temperature ( o c ) l=20m m fig. 3-maximum current rating effect of copper area. resistive/inductive load. l=10mm l=5m m 3.0 2.4 1.8 1.2 0.6 io-average rectified current (a) 100 30 10 3 1 0.3 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 v f -forward voltage (v) fig. 5-typical forward characteristics i f -forward current (a) fig. 2-maximum forward surge number of cycles forward surge current amperes pk (half sine-wave) 200 100 50 10 1 10 100 no of cycles at 60 hz fig. 4-typical junction capacitance cj-junction capacitance 100 50 10 1 1 5 10 50 100 v r -reverse voltage (v) fig. 6-forward pulse current, pulse 10,000 1,000 100 10 i p -pulse current ( a ) .1us 1us 10us 100us 1ms 10ms pulse duration (seconds)
|
